LogikHaus is a Gowin partner. We supply Gowin FPGA development boards and system-on-modules, and our engineers design and verify FPGA logic for Gowin devices, from RTL development to on-hardware bring-up, for customers worldwide.
| Relationship | Gowin partner |
|---|---|
| Gowin families | GW1N (LittleBee), GW2A (Arora), GW5A (Arora V) |
| Our Gowin SOM | LH-FPGA-SOM-484, GW5AT-LV138PG484A |
| Toolchain | Gowin EDA |
| Design languages | VHDL, Verilog |
| Verification | OSVVM, UVM |
From our own Gowin system-on-module to development boards and modules sourced to order.
Our Gowin FPGA system-on-module, built around the GW5AT-LV138PG484A for rapid prototyping and embedded FPGA integration.
Boards covering the GW1N (LittleBee), GW2A (Arora) and GW5A (Arora V) families, selected and supported by our FPGA design team.
Gowin FPGA modules sourced to order. Tell us the Gowin device, package and quantity you need.
Which Gowin family fits depends on your logic size, power budget and bandwidth.
| Family | Typical use |
|---|---|
| GW1N (LittleBee) | Compact, low-power control and interface logic |
| GW2A (Arora) | Mid-range signal processing and embedded designs |
| GW5A (Arora V) | High-performance video and high-bandwidth applications, including the GW5AT-LV138 on our LH-FPGA-SOM-484 |
Every Gowin board and module can be paired with our FPGA design services.
We turn your requirements into an architecture and write synthesisable RTL in VHDL or Verilog for your Gowin device.
Designs are proven in simulation with self-checking OSVVM and UVM testbenches before they reach hardware.
We run synthesis, place and route and timing closure in Gowin EDA, so the design meets timing on your target device.
We bring the design up on your board or ours, and can integrate our own FPGA and ASIC IP cores, such as the VPU that ships on the LH-FPGA-SOM-484.
Gowin FPGAs are programmable logic devices from Gowin Semiconductor, available in families such as LittleBee (GW1N), Arora (GW2A) and Arora V (GW5A). They are designed and programmed with the Gowin EDA toolchain.
We supply and design for the GW1N (LittleBee), GW2A (Arora) and GW5A (Arora V) families. GW1N suits compact, low-power control and interface logic, GW2A suits mid-range signal processing and embedded designs, and GW5A suits high-performance video and high-bandwidth applications.
Yes. Gowin FPGA modules are supplied on request, including GW5AT-LV60-based modules and the Pocket Lab-F2 FPGA board. Tell us the Gowin device, package and quantity you need and we will source the module for you.
The LH-FPGA-SOM-484 is a LogikHaus Gowin FPGA system-on-module built around the GW5AT-LV138PG484A, designed for rapid prototyping and embedded FPGA integration. It ships with the LogikHaus VPU (video processing unit) IP core.
Yes. As a Gowin partner, our engineers develop and verify RTL in VHDL or Verilog for Gowin FPGAs, run synthesis and timing closure in Gowin EDA, and bring the design up on hardware.
Tell us the Gowin device, package and quantity, or what you are building, and our engineers will get back to you.